Table of Contents
Advertisement
Quick Links
DV8 Offroad Light Bar Mount
UNIVERSAL
LBUN-01
TOOLS
REQUIRED
- #3 & #4 Allen Head
- 10mm Socket or Wrench
- Zip Ties (Not Included)
WARNINGS/CAUTIONS BEFORE STARTING INSTALLATION
Before you install this kit —
instructions, warnings, cautions, and notes contained in
this installation instruction guide. Consult your vehicle
owner's manual for proper disconnection of electrical and
lifting of vehicle if required for installation of this product.
This install may require some technical skills and
knowledge of basic mechanical work. If you do not feel that
you are capable of performing this install please take this
product to a trained professional.
After reading this guide please contact us with any
questions or concerns before installing product.
Customer Service: 855-680-9595
DV8 Offroad is not responsible for any bodily injury or harm to you
or your vehicle as a result of an improper install.
6400 SYCAMORE CANYON BLVD.
RIVERSIDE, CALIFORNIA 92507
855-680-9595
WWW.DV8OFFROAD.COM
SKILL
LEVEL
- Novice/Intermediate
- 1 person
Beginner skill required. Simple
wiring required.
Read and understand all
PRODUCT
INSTALLATION
TIME
- Approximately 30 Minutes
Time to install this should
take about 30 Minutes
Proper installation of this kit required knowledge of the factory
recommended procedures for removal and installation of original
equipment components. We recommend that the factory shop manual
and any special tools needed to service your vehicle be on hand during
the installation. Installation of this kit without proper knowledge of the
factory recommended procedures may affect the performance of these
components and the safety of the vehicle
• Always wear eye protection when operating power tools
Inspect all contents of this package to make sure product is not damaged
and all installation hardware has been included. If parts are missing from
kit, please be prepared to provide the following information
1. Name of purchase location
2. Bar Code on side of box
3. Date above bar code
4. Date inside box cover
MANUAL
REQUIRED
855-680-9595
NEED HELP?
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for DV8 LBUN-01
Summary of Contents for DV8 LBUN-01
- Page 1 1. Name of purchase location Customer Service: 855-680-9595 2. Bar Code on side of box DV8 Offroad is not responsible for any bodily injury or harm to you 3. Date above bar code or your vehicle as a result of an improper install.
- Page 2 STEP Begin by taking your 13” Light and installing it to the light bar bracket. Shown in the images is the DV8 Elite 13” bar. Using the M8 bolts and flat washers (provided with light), install the light into the bracket.
- Page 3 STEP Once light is installed, remove the screen from the top of your compatible DV8 Bumper using your #3 allen head and 10mm socket/ wrench. STEP Install the light bracket onto the bumper reusing the hardware from the screens.
- Page 4 INSTALLATION MANUAL STEP Secure bracket and wire light to power. *LBUN-01 shown installed on a 2021 Bronco (MTO Series Bumper) You’re ready to run your new DV8 universal light bar mount. 855-680-9595 NEED HELP?
Need help?
Do you have a question about the LBUN-01 and is the answer not in the manual?
Questions and answers