Using Magnetic Stripe Cards; Using Self-Adhesive Cards - Magicard Enduro Duo User Manual

Using Magnetic stripe cards

If you have an Enduro Mag printer (fitted with the optional magnetic encoding module) you can
simultaneously print and encode the magnetic stripe on the rear of a magnetic stripe card.
The Enduro Mag can encode HiCo and LoCo
type magnetic stripe cards
When loading magnetic stripe cards, make sure the
stripe is on the left and underneath when viewing from
the front of the printer.
Refer to your PC Badge printing application for instructions on
how to print and encode a magnetic stripe card.

Using self-adhesive cards

We recommend only self adhesive cards supplied by Ultra Electronics via your Magicard dealership.
There are many different types of self-adhesive cards. Thorough investigation and testing has shown
that poorer quality or incorrect card types will cause problems in the printer. These problems range
from poor image quality; failure to feed from the card hopper; dye-film being cut and cards getting
jammed in the roller mechanism.
Ultra Electronics Ltd
Magicard Enduro User Manual
- 17 -