Hopper & Stacker; Prepare The Cleaning Roller - Magicard Enduro Duo User Manual

Hopper & Stacker

Prepare the cleaning roller

Open printer, then:
A. Pull out the unused cleaning roller.
B. Peel off white protective layer carefully to reveal
tacky surface.
C. Place cleaning roller back into printer.
Ultra Electronics Ltd
HOPPER: Insert the hopper into the aperture at the back of the printer
and click into place.
Always fan the cards to ensure the cards are not sticking
together before inserting into the hopper, and handle the
cards carefully to keep the surfaces clean, as finger marks
can affect the print quality.
Magicard Enduro User Manual
- 6 -
STACKER: Insert the stacker into the
aperture in the front panel and click into
place. The stacker can hold up to 30, 20mil
to 40mil (0.51mm to 1.02mm) thick cards.
The printer can be operated without the
stacker.