Printer Driver Software (The 'Ultradriver'); Installing The 'Ultradriver - Magicard Enduro Duo User Manual

PRINTER DRIVER SOFTWARE (THE 'ULTRADRIVER')

Note : As part of our continuous improvement program, the UltraDriver software and the printer
firmware for Enduro printers is being updated on a regular basis.
To ensure you get the best performance from your Enduro printer, we recommend that you regularly
check the Magicard website for the latest driver software and firmware at:-

Installing the 'UltraDriver'

1. Important
printer.
Load the driver CD ROM into the PC you have connected
to the printer.
If the CD does not run automatically, click the start
button, and then click on "run". Type "D:\autorun"
(where D is the drive letter for your CD drive), then press
the return key.
2. Select the language you wish
to use.
3. Select the 'Enduro' option.
4. Select 'Install Software'
5. Then select 'Install Driver'
The driver will now start to install ......
..... turn to next page
Ultra Electronics Ltd
www.magicard.com/support/technical-support
– before loading the driver, make sure the USB cable is NOT connected to the
Magicard Enduro User Manual
- 18 -