Clearaudio Innovation Compact User Manual page 20

User manual
If you use the
accurate adjustment, completely independent of the power line or frequency
of your country. As well, the 300 Hz calibrated light, used as an external light
source is completely independent from possible power line fluctuations, which
could influence the result by regular light. The 300 Hz of the
generated by a stabilized quartz oscillator and permit a very exact adjustment.
Please put the
turntable. Here you also have the possibility to choose between two different
speeds.
With the outside scale you can detect the speed of 33 Hz and with the inside scale you can detect
the speed of 45 Hz. Again, the big advantage of the Clearaudio
can place your cartridge onto the stroberecord, while measuring the speed, as there are grooves
provided on the disc. This means, for the first time a real time speed analysis is possible under
realistic circumstances.
Press the button of the
or turntable speed until the horizontal lines do not move anymore.
As more accurate your turntable speed is adjusted, as better the overall sonic appearance of the
record playback will be!
It is mandatory to check the speed several times through out the year, to ensure that other influences
are not minimizing the sound quality.
Speed Light
Light source:
Battery:
Page 20
Speed Light
Stroboscope Testrecord
speed light
source and place it parallel over to the scale and adjust the motor
Technical Data:
Blue LED / 300 Hz precision light source (calibrated)
V23GA – 12 V – Alkaline (Art. No.: AC039/B)
(Technical changes are subject without notification)
Date: 2022-11
Clearaudio electronic GmbH
Spardorfer Str. 150
91054 Erlangen
Phone: +49 9131 40300 100
Fax: +49 9131 40300 119
www.clearaudio.de
www.analogshop.de
info@clearaudio.de
(Art. No. AC039) you can reach an even higher or more
with the fine lines upward on your
Stroboscope Testrecord
- Tip -
Germany
© clearaudio electronic GmbH, 2022-11
Speed Light
are
is, that you