Clearaudio Innovation Compact User Manual page 12

User manual
7.)
To install the tonearm and / or to mount and adjust a cartridge, please follow the user manual of the
manufacturer.
8.)
The following final adjustment is very important:
Please ensure that your turntable rack is in a levelled position.
Please check with the delivered level gauge, if your
position.
You can adjust each of the turntables feet to get the turntable levelled (Pic. 9).
To adjust the height, first turn the middle part of the feet (Pic. 10 a; green arrow), then you can
twist the end part (Pic. 10 b, red frame) to the desired height.
After the adjustment, please make sure, to turn the middle part again to fix the selected position.
Pic. 9: Alignment of the
turntable
Only if the turntable is in a levelled position you will get the best results with your
Compact
turntable.
9.)
Please connect the plug of the power supply with the linkage of the turntable.
After that connect the power supply with the electric power supply.
Pic. 11: Connection of power supply and motor
Page 12
Pic. 10 a: Middle part
10.)
Place the flat belt around the platter and around the
motor pulley.
By pushing the sensor-switch, marked with "33 1/3"
on the motor, the turntable starts to spin until 33 1/3
rpm is reached.
After the initial setup we recommend to let the turntable
spin for at least 15 to 30 minutes.
This ensures a smoother break in.
Innovation Compact
turntable is in a levelled
Pic. 10 b: End part
© clearaudio electronic GmbH, 2022-11
Innovation