BestCode NExT 8 Series Technical Manual page 11

WARNING
PERSONAL INJURY & EQUIPMENT DAMAGE: Most Inks and Makeups are highly flammable liquid.
Dried ink can also be highly flammable, so great care should be taken to avoid exposing the fluid to
heat, sparks, static, and any other potential source of spark.
Inks and Makeups are potentially hazardous substances. Always read the SDS of the Ink, Makeup, and
Cleaner before operating, servicing, or performing maintenance on the Printer. Always wear proper
protective equipment when handling Ink, Makeup, or Cleaner. Wear solvent resistant gloves (Nitrile)
and safety glasses to prevent accidental exposure. Never use cleaner to wash Ink or Makeup stains
from skin, hair, or nails.
BESTCODE SAFETY DATA SHEETS:
https://support.bestcode.co/safety-data-sheets/
WARNING
EQUIPMENT DAMAGE: Do not add Ink or Makeup to the Printer without being prompted by the
system. Over-filling the Printer can cause leaks and damage.
WARNING
EQUIPMENT DAMAGE: The printhead should never be submerged in Cleaner. This can cause
un-repairable damage to the printhead.
The printhead must be dry before starting the Printer.
WARNING
PERSONAL INJURY & EQUIPMENT DAMAGE: Ink and Makeup produce vapor that is high flammable.
Ensure that adequate ventilation is provided for the Printer. Failure to provide adequate ventilation
may cause high volumes of vapor to accumulate around or inside the printer. These high levels of
fumes are easily ignited, and also have negative health effects. This may cause serious damage to the
Printer and can potentially cause serious injury or death. See SDS for proper vapor handling
instructions.
™
CodeProtect BestCode Warranty and Support
BestCode products are delivered with a 2 Year Manufacturer's Limited Warranty.
Call or email for detailed warranty information.
Distributors should email support@bestcode.co for all warranty questions.
vii