Related Manuals for BestCode Next 8 Series
Summary of Contents for BestCode Next 8 Series
- Page 1 Next Series 8 CIJ Printer Operators guide Part Number: 49-0001-01 Software version 01.04.07+ , Jan 2020...
- Page 2 PERSONAL INJURY: ALWAYS WEAR RUBBER GLOVES AND SAFETY GLASSES WHEN HANDLING INKS AND SOLVENTS. PERSONAL INJURY: ALWAYS WEAR RUBBER GLOVES AND SAFETY GLASSES DURING FLUIDIC MAINTENANCE. PERSONAL INJURY: INKS AND SOLVENTS ARE POISONOUS, DO NOT INGEST. PERSONAL INJURY: DO NOT USE SOLVENT TO WASH INK FROM SKIN. IF EXPOSED, GENTLY RINSE AREA WITH SOAPY WATER.
- Page 3 PERSONAL INJURY & EQUIPMENT DAMAGE: Do not use any power cord that is not provided by BestCode. Power cords must have 3 prongs, live, neutral, and ground provided. Power socket-outlet must provide reliable earth ground. Power cord and outlet must remain clean and dry. The socket- outlet shall be installed near the equipment and shall be easily accessible.
- Page 4 Power On / Off Power On Power Off Start / Stop Jet Start Jet Stop Jet Clean Start & Clean Stop are the normal production starts and stops. These use a small amount of makeup per routine. The software will automatically protect the operator from adding too much makeup. When the operator is logged in using the Technician Level Password, all Starts &...
- Page 5 When to Add Ink The BestCode Next Series 8 CIJ will begin requesting an Ink bottle be added when the Float switch in the Ink Tank is in the low state. An on-screen pop-up Ink Warning, 10-0003 will occur every 6 minutes while the Ink Tank is in this State.
- Page 6 11. Press OK on the Success screen pop-up (10-0001) When to Add Makeup The BestCode Next Series 8 CIJ will allow a Makeup bottle to be added when the Float switch in the Makeup Tank is in the OK state.
- Page 7 How to Add Makeup 1. Place 1 capped bottle of Makeup in the Makeup Smartfill Cup . 2. Make sure the SmartFill symbols are aligned. Empty 3. Press the Makeup Status button on the Screen. 4. This process works for Low, Empty, and OK situations.
- Page 8 3034 SE Loop 820 Phone: (+1) 817-349-8555 For product questions email: Fort Worth TX Fax: 817-349-8480 info@bestcode.co 76140 USA www.bestcode.co BestCode product and fluids are available through distribution around the globe. Contact your local BestCode distributor for ordering information. Made in the USA...
Need help?
Do you have a question about the Next 8 Series and is the answer not in the manual?
Questions and answers