System Cables; Fluidic Safety Guidelines - BestCode NExT 8 Series Technical Manual

System Cables

WARNING
PERSONAL INJURY & EQUIPMENT DAMAGE: Do not use any power cord that is not provided by
BestCode. Power cords must have 3 prongs, live, neutral, and ground provided. Power socket-outlet
must provide reliable earth ground. Power cord and outlet must remain clean and dry. The socket-
outlet shall be installed near the equipment and shall be easily accessible. The Next Series 8 CIJ does
not have a mechanical power off switch, so the power cord plug is to be considered the primary
disconnect device. Do not use extension cords!
Follow all local safety regulations during installation and operation of the Next Series 8 CIJ.
WARNING
PERSONAL INJURY & EQUIPMENT DAMAGE: Regularly inspect cables, sockets, and power supply
module for signs of wear, damage, and corrosion. Inspect all ground connections for corrosion, ink
build-up, or any other contaminant that would impede the ability to provide earth ground to the
Printer. Damaged or poorly connected cables can cause damage to the Printer and may also cause
serious injury or death.

Fluidic Safety Guidelines

WARNING
PERSONAL INJURY: THE SAFETY DATA SHEETS (SDS) IS THE PRIMARY SOURCE OF SAFE HANDLING
INSTRUCTION FOR THE USE OF INKS, MAKEUPS, AND CLEANERS ASSOCIATED WITH THE BESTCODE
NEXT SERIES 8 CIJ PRINTER. FAILURE TO OFFER TRAINING IN COMPLIANCE TO 29 CFR 1926.59 IS IN
BREACH OF THE REQUIREMENTS FOR THE
AND LABELING OF CHEMICALS (GHS).
GHS TRAINING INFO:
https://www.osha.gov/sites/default/files/publications/osha2254.pdf
BESTCODE SAFETY DATA SHEETS:
https://support.bestcode.co/safety-data-sheets/
GLOBALLY HARMONIZED SYSTEM OF CLASSIFICATION
vi