User Login & Logout - Speco HRLN User Manual

Account & Permission Management
Enter current password and then check "Enable" to input pattern lock.
Recover Password

Click "Recover Password" to reset the password.
Edit User

Click "Edit User" to pop up the window as shown below. Admin is enabled, its permission control is closed and permission group cannot be
changed by default. You can enable or disable other users (if disabled, the user will be invalid), open or close their permission control (if closed, the
user will get all the permissions which admin has) and set their permission groups. Click "OK" to save your settings.
10.2 User Login & Logout
Login: Click StartLogin or directly click the preview interface and then select username and enter the password in the popup window. Click
"Login" button to log into the system.
Logout: Click StartLogout or click StartShutdown to pop up the "Shutdown" window. Select "Logout" in the window and then click "OK"
button to log out of the system.
68
DVR User Manual