Britax ISOFIX COMPATIBLE Instruction Manual page 80

ACCESSORIES
80
Instructions for Installation & Use
INFANT INSERTS
For use until infant reaches the lower
height marker (approx 18mth old)
There are 3 types of infant inserts:
Infant Insert
Designed to provide additional support for
smaller babies. Discontinue use at the lower
height marker or when the insert is a tight fit or
creates discomfort for larger babies.
The Flexi Infant Comfort Insert
Designed to support smaller babies. The
wings/side panels can be easily detached by
unclipping the press studs, allowing you the
flexibility to keep or remove panels as your baby
grows. Discontinue use at the lower height
marker or when the insert is a tight fit or creates
discomfort for larger babies.
Newborn Insert
Designed to offer maximum support for smaller
babies. The Newborn Insert can be used
'stacked' on top of either the Infant Insert or the
Flexi Infant Comfort Insert or it can be used on
its own. Discontinue use at the lower height
marker or when your baby no longer requires the
additional support.
To replace infant insert
A. Disconnect the buckle and place the
insert under the shoulder and lap
straps.
B. Feed the crotch strap through the insert
and re-connect buckle.
C. If using the Flexi Infant Comfort Insert,
re-attached side wings if required.
(If supplied)