Installing Into Your Vehicle - Britax ISOFIX COMPATIBLE Instruction Manual

SETUP - INSTALLING INTO YOUR VEHICLE SETUP - INSTALLING INTO YOUR VEHICLE
FOR REARWARD FACING
6
Pull
Press
7
8
9
26
Instructions for Installation & Use
FOR REARWARD FACING
Step 5. Press the harness adjuster button
Press
5
5
Step 6. Place your hand under both shoulder
Step 7. Disengage buckle by pressing the red
Step 8. Place buckle tongues into buckle
POSITION IN YOUR VEHICLE
Step 9. Choose your vehicle seat position for
9
located under the trim.
harness straps, then pull shoulder
harness straps to lengthen.
button. Remove infant insert (if fitted).
tongue holders.
rearward facing mode. Ensure child
seat is against vehicle seatback - the
rebound bar does not need to contact
vehicle seatback.
If desired, this gap may be packed
(see page 29).