Table of Contents
Advertisement
SETUP - TOP TETHER FOR REARWARD FACING
Lengthen strap
2
Press
1
4
5
36
Instructions for Installation & Use
HOW TO INSTALL THE TOP TETHER
Step 1. Press top tether adjuster button.
Step 2. Lengthen top tether strap fully, ensure
all unnecessary twists are removed.
Step 3. Place the top tether over the vehicle
seatback, and if needed, remove the
vehicle headrest. If you cannot remove
the headrest, then ensure that the top
tether straps are placed on the
outer-sides of the headrest.
3
Step 4. Connect top tether attachment clip to
vehicle anchor fitting.
Check your vehicle manual for the
correct anchor fittings in your vehicle
.
Step 5. Pull top tether strap slack onto side of
adjuster.
ENSURE THE TOP TETHER STRAPS ARE
NOT TWISTED TIGHTLY. A HALF TWIST IS
ACCEPTABLE.
Advertisement
Table of Contents
