Table of Contents
Advertisement
SETUP - RECLINE ANGLE FOR REARWARD FACING
ANGULAR ADJUSTMENT OF CHILD
SEAT
Some vehicle seats have more rearward slope
than others. The angle may be adjusted by
placing a firm packing between the child seat
and the underside of the base. Packing can be a
firmly rolled up towel (see figure A).
If the vehicle seat is flat then some packing may
be required at the front edge of the base to
Figure .A.
achieve the recline angle (see figure B).
Always check that the rearward facing level
indicator confirms the correct installation angle for
rearward facing mode (see page 28).
You are now ready to install your car seat
with either vehicle seat belt (see page 30) or
ISOFLEX
Figure .B.
®
installation go to page 34
Instructions for Installation & Use
29
Advertisement
Table of Contents
