Table of Contents
Advertisement
SETUP -
Engage buckle
6
SEATBELT FOR FORWARD
Step 4. Engage the vehicle seatbelt buckle
4
and tongue without twists.
Step 5. Apply downward pressure onto the
inner seat area and remove all the seat
belt slack by pulling the seat belt from
the buckle side across the child seat
and back into the retractor.
5
Step 6. You are now ready to install top tether.
Refer to page 58.
ALWAYS REMOVE SLACK FROM
SEATBELT.
ENSURE THERE ARE NO TWISTS IN
SEATBELT.
FACING
Instructions for Installation & Use
55
Advertisement
Table of Contents
