Table of Contents
Advertisement
SETUP - HEADREST AND SHOULDER HARNESS
7
Flat
back
rest
Curved seat base
Harness Straps
not below
green zone
Above Shoulder Level
FOR REARWARD FACING
Step 7. Place buckle tongues into buckle
tongue holders.
Step 8. Place baby into the child seat. Ensure
your baby is positioned with their back
flat against the back rest and their
bottom correctly positioned into the
curved seat base.
8
Step 9. Check the headrest and shoulder slot
9
position is level with the shoulders but
not below.
The shoulder straps must be in the
slots which are nearest to the child's
shoulders but not lower than the
child's shoulders.
Always adjust the height of the
shoulder straps as the child grows.
Instructions for Installation & Use
41
Advertisement
Table of Contents
