Table of Contents
Advertisement
SETUP - ISOFLEX
6
7
IMPORTANT:
Do not attach the lower attachment connectors of two separate child restraints to
the same ISOFIX low anchorages in your car.
Always attach the top tether strap to the child restraint upper anchorage in your car.
FOR REARWARD FACING
®
Step 5. Connect the ISOFLEX
5
each ISOFIX low anchorage.
Give a firm tug on the connector to
check it is securely fitted. Connectors
may also show a green indicator on
top.
Step 6. With the child seat in position, apply
firm pressure whilst pulling on adjuster
strap to remove all slack and tighten
the ISOFLEX® strap. Repeat on the
other side of the restraint. The two
tension indicators will show green
indicating minimum tension has been
applied.
Step 7. You have now successfully completed
the ISOFLEX
ready to install the top tether. Please
go to page 36.
You do not need to seatbelt install with
ISOFLEX
ENSURE THERE ARE NO TWISTS IN
ISOFLEX
®
ALWAYS REMOVE SLACK FROM
ISOFLEX
®
A LOOSE INSTALLATION IS DANGEROUS.
connectors into
®
installation and are now
®
.
®
CONNECTOR STRAPS.
STRAPS.
Instructions for Installation & Use
35
Advertisement
Table of Contents
