Remove Cover - Britax ISOFIX COMPATIBLE Instruction Manual

CARE AND MAINTENANCE - REMOVE COVER
TO REMOVE COVER FOR WASH:
NOTE: There is no need to disconnect the
shoulder harness assembly straps from restraint.
Step 1. Remove the restraint from vehicle.
Step 2. Disengage the harness tongues from
the harness buckle.
Step 3. Remove any accessories, infant
insert, crotch pad and shoulder pads
(if supplied).
1
TO REMOVE HEADREST COVER:
Step 1. Lift headrest to the highest position and
unclip press studs on both sides, then
unhook clips on both sides attached
under headrest wings.
1
Step 2. Behind the headrest reveal the hidden
elastic, lift out and remove elastic over
and away from headrest.
Step 3. Peel headrest cover away.
2
Instructions for Installation & Use
73