Test Pattern; Clr Errors; Figure 7-3. Clear Errors Screen - ADTRAN TSU LT User Manual
Hide thumbs
Also See for TSU LT:
- User manual (74 pages) ,
- Quick start manual (2 pages) ,
- User manual (64 pages)
Table of Contents
Advertisement
Chapter 7. Test Menu
TEST PATTERN
CLR ERRORS
7-4
Sets the pattern for the test and initiates the transmission of
the pattern. There are four patterns available. The test is
terminated by selecting
1:8 ALL DS0s
Generates a 1 in 8 pattern in all DS0s.
511 Active DS0s
Generates a 511 test pattern and inserts the pattern into
currently active channels.
All Zeros
Generates an all zero's pattern in every channel.
All Ones
Generates an all one's pattern in every channel.
has two functions.
CLR ERRORS
1.
It clears out the 511 error total when you press
2.
It displays a total of the 511 errors. If 511 errors are being
received, the display is updated accordingly. See Figure
7-3.
This menu function is very useful for testing end-to-end
integrity of the network. First loop up the far end TSU LT.
Then send a 511 pattern from the local TSU LT. The
screen can then be used to determine if the link is
ERRORS
NO PATTERN
Figure 7-3. Clear Errors Screen
TSU LT User Manual
.
Enter
CLR
61202060L2-1
.
Advertisement
Table of Contents
