Checking The Abs Lamp - Bosch Premio EVO Translation Of Original Operating Instructions

6.8.1

Checking the ABS lamp

Only applies to pedelecs with this equipment
The ABS indicator lamp must light up after the

system has started up and must go out once
speed has reached about 5 km/h.
 The ABS is defective if the ABS indicator lamp
does not light up after the electric drive system
starts up.
 An error code will be displayed on the display
screen.
If the indicator lamp does not go out after you set
off or it lights up while you are riding, this means
there is an error in the ABS. The ABS is then no
longer active. The brake system itself will continue
to work. It is only the ABS control which no longer
works. If the ABS indicator lamp is lit, the ABS
function is not active.
MY23P0a - 42_1.0_19.10.2022
Operation
169