Battery Errors - Bosch Premio EVO Translation Of Original Operating Instructions

Pegasus pedelecs, led remote on-board computer
Table of Contents

Advertisement

9.2.3

Battery errors

Symptom
Cause
The battery discharges
The battery may be at the end of its
very quickly.
useful life.
The battery cannot be
Is the charger mains plug firmly
recharged.
connected to the socket?
Is the charger plug firmly connected to
battery?
Is the adapter firmly connected to the
charger plug or the battery's charging
port?
Is the connection terminal for the
charger, charger adapter or batteries
dirty?
The battery does not start
The battery may be at the end of its
charging when the
useful life.
charger is connected.
The battery and charger
Has the battery or charger temperature
become hot.
exceeded the operating temperature
range?
The charger is hot.
If the charger is used continuously to
charge batteries, it may become hot.
The LED on the charger
The LED on the charger will go out
does not light up.
when the battery is fully charged.
Is the charger plug firmly connected to
battery?
Is the battery fully charged?
The battery cannot be
removed.
The battery cannot be
inserted.
Fluid is leaking from the
battery.
Table 73: Error solution for battery
MY23P0a - 42_1.0_19.10.2022
Troubleshooting, fault clearance and repair
Remedy
 Replace old battery with new one.
1
Disconnect the charger mains plug and plug it in again.
2
Start charging.
3
If the battery still won't recharge, contact your specialist
dealer.
1
Disconnect the charger plug and plug it in again.
2
Start charging.
3
If the battery still won't recharge, contact your specialist
dealer.
1
Connect the adapter firmly to the charger plug or the battery
charging port.
2
Start charging.
3
If the battery still won't recharge, contact your specialist
dealer.
1
Wipe with a dry cloth to clean the connection terminals.
2
Start charging.
3
If the battery still won't recharge, contact your specialist
dealer.
 Replace old battery with new one.
1
Interrupt charging process.
2
Leave battery and charger to cool down.
3
Start charging.
 If the battery becomes too hot to touch, there might be a
problem with the battery.
4
Contact specialist dealer.
1
Interrupt charging process.
2
Leave charger to cool down.
3
Start charging.
This is not a malfunction.
1
Check connection for any contaminants.
2
Insert charger plug.
3
If the battery still won't recharge, contact your specialist
dealer.
1
Disconnect charger mains plug.
2
Insert mains plug again.
3
Start charging.
4
Contact your specialist dealer if the LED on the charger still
doesn't light up.
 Contact specialist dealer.
 Contact specialist dealer.
 Observe all the warnings in Section 2 Safety.
251

Advertisement

Table of Contents
loading

Table of Contents