Table of Contents
Advertisement
7.5.19 Adjusting Bowden-cable-operated
twist grip, dual-cable
Only applies to pedelecs with this equipment
For a smooth gear shift, adjust the adjusting
sleeves on the shifter housing.
There is noticeable play of 2 to 5 mm (1/2 gear)
when you turn the twist grip.
1
Figure 214: Twist grip with adjusting sleeves (1) with
play (2)
7.5.20 Checking kickstand stability
1 Place the pedelec on a slight elevation of 5 cm.
2 Extend kickstand.
3 Jolt pedelec to check stability.
If pedelec topples over, tighten screws or
change height of the kickstand.
MY23P0a - 42_1.0_19.10.2022
2
Cleaning, maintenance and inspection
227
Advertisement
Table of Contents
