Table of Contents
Advertisement
6.22.4 Using an ENVIOLO gear shift gear
Only applies to pedelecs with this equipment
The selection of the appropriate gear is a
prerequisite for a physically comfortable ride and
making sure that the electric drive system
functions properly. The ideal pedalling frequency
is between 70 and 80 revolutions per minute.
Stop pedalling briefly when changing gears.
This makes it easier to switch gears and
reduces wear on the drivetrain.
CAUTION
!
Crash caused by incorrect use
If the rider applies too much pressure on the
pedals during a gear change and activates the
shifter or changes several gears at a time, their
feet may slip from the pedals. This may cause a
crash or flip-over with injuries.
Switching down several gears to a low gear may
cause the twist grip outer sleeve to suddenly
come off. This will not have an adverse effect on
the twist grip's correct functioning since the outer
guide returns to its original position after the gear
change is complete.
Apply little pressure on the pedals while
changing gears.
Never change more than one gear at a time.
Notice
The interior hub is not completely waterproof. If
water gets into the hub, it may rust and the gear
switch function may no longer function as a result.
Never use the pedelec in places where water
may get into the hub.
Never detach the hub yourself. Contact
specialist dealer.
MY23P0a - 42_1.0_19.10.2022
The hub cannot be switched through its entire
transmission range when stationary. As a general
rule, 50–70% of the transmission range can be
used when switched to stationary. The remaining
part of the transmission range can be adjusted
when riding.
The automatic ENVIOLO gear shift includes a
twist grip with an indicator.
1
2
Figure 175: ENVIOLO twist grip with indicator
1
Twist grip with indicator
2
Manual gear shift indicator
3
Automatic gear shift indicator
4
Twist grip
5
Mode button
Operation
4
3
190
Advertisement
Table of Contents
