Maintaining The Seat Post; Maintaining The Suspension Seat Post; Maintaining The Carbon Seat Post; Maintaining The Rims - Bosch Premio EVO Translation Of Original Operating Instructions

Pegasus pedelecs, led remote on-board computer
Table of Contents

Advertisement

7.4.9

Maintaining the seat post

1 Carefully preserve screw connections with wax
spray. In doing so, ensure that no wax is
applied to the metal contact surfaces.
2 Replace the assembly paste protective layer
on the metal contact surfaces on the seat post
and seat tube every year.
Maintaining the
7.4.9.1
1 Lubricate articulated joints with spray oil.
2 Deflect and let the suspension seat post
rebound five times. Remove any surplus
lubricant with a clean cloth.
Maintaining the
7.4.9.2
Notice
Rain and puddle water can cause contact
corrosion if carbon seat posts are used in an
aluminium frame without protective assembly
paste. It may then take a great deal of force to
remove the seat post. The carbon seat post may
break as a result.
1 Take out the carbon seat post.
2 Remove old assembly paste with a cloth.
3 Apply new assembly paste with a cloth.
4 Re-insert the carbon seat post.

7.4.10 Maintaining the rims

 Care for chrome rims, stainless steel rims and
polished aluminium with chrome or metal
polish. Never maintain the brake surface with
polish.
MY23P0a - 42_1.0_19.10.2022
suspension seat post
carbon seat post
Cleaning, maintenance and inspection

7.4.11 Maintaining the leather saddle

Standard leather care products keep leather
smooth and resistant, brighten its appearance and
improve or replace stain protection.
1 Try leather care product out on a less visible
spot before use.
2 Care for leather saddle from below with a
leather care product. Only maintain the top of
leather saddles with a leather care product if
they are badly worn and dried-out.
3 Avoid wearing light-coloured trousers after
care due to staining.

7.4.12 Maintaining the hub

1 Apply wax spray especially around the spoke
holes. In doing so, ensure that no wax is
applied to brake parts.
2 Treat rubber seals with a cloth with one or two
drops of silicone spray. Never use oil if you
have disc brakes.

7.4.13 Maintaining the spoke nipples

1 Apply wax spray onto the spoke nipples from
the rim side.
2 Treat heavily corroded spoke nipples with a
drop of penetrating of special care oil.
208

Advertisement

Table of Contents
loading

Table of Contents