Table of Contents
Advertisement
4.4.4
Break in operation
Notice
The battery discharges when not in use. This can
cause irreparable damage to the battery.
The battery must be recharged every
6 months.
The battery may become damaged if it is
connected permanently to the charger.
Never connect the battery to the charger
permanently.
If the battery is stored for a longer period of time
when empty, it can become damaged despite low
self-discharge and the storage capacity can be
greatly reduced
Store battery with at least 30% charge.
Charge components every 3 months for around
1 hour via the USB diagnostic interface to
avoid an extremely low charge level in the
integrated battery in the LED remote and the
system controller.
Remove the on-board computer and battery
from their mount if the pedelec is not going to
be used for up to four weeks.
If the pedelec is removed from service for
longer than four weeks, you need to prepare it
for a break in operation.
MY23P0a - 42_1.0_19.10.2022
4.4.4.1 Preparing a break in operation
Remove the rechargeable battery from the
pedelec.
Charge battery between 30% and 60% so that
2 to 3 LEDs light up on the battery level indicator.
The pedelec needs to be cleaned with a damp
cloth and preserved with wax spray. Never wax
the friction surfaces of the brake.
Before longer periods without use, it is
recommended to have the specialist dealer carry
out maintenance and basic cleaning and apply
preservative agent.
4.4.4.2 Carrying out a break in operation
1 Store the pedelec, battery and charger in a dry,
clean environment. We recommend storing
them in uninhabited rooms with smoke alarms.
Dry locations with an ambient temperature
between 10 °C and 20 °C are ideal.
2 Check the battery level after 6 months. If only
one LED on the battery level indicator lights up,
recharge the battery to between 30% and 60%.
Transporting and storing
108
Advertisement
Table of Contents
