Set Device Position - HIKVISION DS-2TD6267-100C4L/WY User Manual

Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
You can click ON to manually call the path and OFF to stop it.
5. Click Save.
What to do next
Set the combined path in park action (see Set Park Action) or scheduled task (see Set Scheduled
Tasks).

9.12 Set Device Position

Before You Start
Go to Configuration → PTZ → Basic Settings → PTZ OSD to enable PT Status display.
Steps
1. Go to the setting page: Configuration → PTZ → Position Settings.
2. Select a PT Mode.
Manual
Auto
3. Optional: Check Display Position Diagram to display the position diagram on the live view.
4. Set Vandal-proof alarm.
After enabling the function, the device triggers alarms once its position changes because of
shock or vandalism.
Sensitivity
The higher the value is, the easier the alarm will be triggered.
Upload Vandal-proof Alarm
The device uploads the alarm information when the alarm is triggered.
5. Get the device location information in advance, and input the longitude and latitude of the
device manually.
6. Click Save.
What to do next
If you lost direction when operating the device, you can click Point to North to call the north
position that is saved in the device.
Use a direction indicating device to determine the North at the device
location, and set the North for the device. For details, see Set Manual
Compass.
For the device that has built-in e-compass, the compass can
automatically tell the north direction for the device. For details, see
Set Auto Compass.
55