Full Screen; Conduct Regional Focus; Light; Operate Wiper - HIKVISION DS-2TD6267-100C4L/WY User Manual

Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
live view among multiple channels.
Click to switch live view among multiple channels.

10.1.6 Full Screen

This function is used to view the image in full screen mode.
Click to start full screen mode and press ESC button to exit.

10.1.7 Conduct Regional Focus

You can enable the function to focus on certain area.
Steps
1. Click to enable regional focus.
2. Drag the mouse on the live view to draw a rectangle as the desired focus area.
3. Click to disable this function.

10.1.8 Light

Click to turn on or turn off the illuminator.

10.1.9 Operate Wiper

For the device that has a wiper, you can control the wiper via web browser.
Note
Wiper operation and settings vary on device models.
Steps
1. Go to Configuration → PTZ → Wiper.
2. Select a wiper mode.
One Time
Cycle
Duration
The schedule in which the wiper is ready to work.
Interval
The interval between two successive wiping actions.
The wiper wipes one time when you click
The wiper works on schedule at set wiping interval. Click
view to start wiping.
59
on live view page.
on live