Set Combined Path - HIKVISION DS-2TD6267-100C4L/WY User Manual

Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
Note
Not all task types support the settings of action ID and smart event or VCA function. Please take
the actual product for reference.
5. Repeat step 3 and step 4 to set more than one scheduled tasks.
6. Set Park Time. During the set task period, if you operate the device manually, the scheduled
task will be suspended. When the manual operation is over, the device will continue to perform
the scheduled task after the set park time.
Note
Up to 30 time periods can be configured per day.
7. Click Save.
Note
If you want to clear all scheduled tasks, go to Configuration → PTZ → Clear Config, check Clear
All Scheduled Tasks, and click Save.

9.11 Set Combined Path

It offers the option to add multiple types of VCA scanning tasks to one combination path. Setting
the combined path as a scheduled task or a park action is convenient to manage multiple VCA
functions in different circumstances.
Before You Start
Note
This function is only supported by certain models.
Finish setting the desired actions (Linear Scan and Patrol are available) and VCA functions (Fire
Detection is available). See Set Linear Scan, Set Patrol Scan, and Fire and Smoke Detection for
configuration instructions.
Steps
1. Go to Configuration → PTZ → Combined Path.
2. Select a channel.
3. Select a path number from the drop-down list.
Up to 4 paths are available.
4. Click Add, and set the action type, action No. and VCA type for the added action.
Up to 10 actions can be added to one path.
54