Sleep Function; Alarm; Audio Input - Revo GPE036W-A180200-Z Operating Instructions Manual

Audio input

You can play back the sound from an external device via the loudspeaker of the SUPERCONNECT STEREO.
> Connect the external device to the AUX-IN connector (3.5mm stereo jack) on the rear panel
> Select the audio input with the MODE button. The display shows [Aux-In].
Control and playback is done on the external device. Do not set the volume on the playback device too
noise disturbances.
Advanced functions

Sleep function

> Press the MENU button and then select [Main Menu > Sleep].
> Use the  or  buttons to set in steps of Sleep off, 15, 30, 45, 60 minutes to set the time period after
which the device switches to standby in each mode.
Alternatively:
Press the SLEEP button several times.
>
A clock symbol appears in the status bar of the display with the time remaining until the SUPERCONNECT STEREO switches
to standby.

Alarm

Press the MENU button and then select [Main Menu > Alarm].
Alternatively:
Press the ALARM button on the device to directly start the alarm configuration.
>
low to avoid
63