More Information About Network Connection - Revo GPE036W-A180200-Z Operating Instructions Manual

System settings

More information about network connection

> To view more information about the current connection, select Network.
> Select Manual Settings if you know the parameters of your network and want to configure them manually.
Follow the instructions on the display.
Select Delete Network Profile to delete connections that are no longer required.
>
Under NetRemote PIN you can configure a PIN for remote access (e.g. with the UNDOK app).
>
Select Keep network connected if the WiFi connection is to be maintained even in standby mode.
>
This setting increases the power consumption, but allows app control via the UNDOK app.
Settings
Press the MENU button and then select [Main Menu System Settings > Time and Date].
Select [Time/Date Setting] to set the time and date manually.
>
Use the  or buttons to select a value. Use the or buttons to change it.
Confirm by pressing SELECT.
>
> Select [Time Update] to set whether the time update should be done automatically via DAB, FM or
internet or whether you want to enter it manually.
To do this, select [Update DAB+], [Update FM], [Update NET] or [No Update].
>
Under the option [Set Format ] you can activate the 12 or 24 hour format. Confirm the selection with the SELECT
>
button.
Select [Set Time Zone], to match the current time zone you are in
>
(only when updating via the Internet).
> Under [Daylight Saving Time] you can define whether daylight saving time should currently be active (only when
updating via the internet).
Language
Press the MENU button and then select [Main Menu > System Settings > Language].
>
Press  or  to select the language and press SELECT to confirm.
>
69