Activating Bluetooth Mode; Pairing; Playing Music - Revo GPE036W-A180200-Z Operating Instructions Manual

Bluetooth

Activating Bluetooth mode

Press the MODE button repeatedly until [Bluetooth Audio] is shown in the display.
>
Alternatively:
> Press the MENU button and then select [Main Menu > Bluetooth].
In the status bar of the display, a flashing [BT] signals pairing mode.
If the SUPERCONNECT STEREO has already been paired once with another device that is within range the
connection is established automatically.

Pairing

> Activate Bluetooth on your music player, e.g. a smartphone or tablet.
For information on how to activate Bluetooth on your music player, please refer to the corresponding operating
instructions of the device you want to pair with the SUPERCONNECT STEREO.
Please note that only 1 device can connect to the SUPERCONNECT STEREO at a time.
Be careful not to exceed the maximum Bluetooth range of 10 metres to ensure proper playback quality.
> On your music player, select the list of Bluetooth devices found.
Find the entry SUPERCONNECT STEREO in the list and select it. If you are asked to enter a PIN, enter "0000" (4x zero).
>
When pairing is successfully completed, [BT] will stop flashing on the REVO Radio display.
>

Playing music

> Select a music track on your music player and play it.
> The sound is now played back via the SUPERCONNECT STEREO.
You can control playback on your music player using the playback buttons on the REVO radio remote control
(compatible devices only).
To pair a new device with the SUPERCONNECT STEREO, you must first disconnect the old device. You can either start this on the
external device or select STEREO MENU > [Bluetooth Setup] on the radio The SUPERCONNECT STEREO is now in pairing mode
again.
62