Setting Mono/Stereo; Storing Fm Stations; Selecting The Programmed Stations; Deleting A Favourite Memory - Revo GPE036W-A180200-Z Operating Instructions Manual

FM operation

You can set in the menu > Scan setting whether the scan only finds strong stations (Only strong stations).
To do this, press MENU > Scan setting >Strong stations only> [Yes]. Confirm the selection with SELECT. As a result, the channel
search stops only for stations with strong reception. For weaker stations, please use the manual station search.

Setting mono/stereo

> Press MENU and use  or  to select > Audio Setting > Listen in Mono only? > Select [YES] to play back in mono only
when FM reception is weak.
Confirm by pressing the SELECT button.
>

Storing FM stations

The favourite memory can store up to 10 stations.
The stored station are retained even after a power failure.
> Play the desired station.
Press and hold one of the number buttons 1 ... 7 (1-6 on the remote control). [saved.] appears in the
>
display.
> Storing additional stations: Repeat process.
Alternatively:
> Press and hold the FAV+ button on the remote control. Use the Joystick on the device or the
  buttons on the remote control to select a favourite memory location and press the SELECT button.

Selecting the programmed stations

Press the desired number button 1 ... 7. If you have not stored a station in the selected favourite memory location
>
[Preset empty] appears.
Alternatively:
> Press the FAV+ button on the remote control. Use the Joystick on the device or the
  buttons on the remote control to select a favourite memory location and press the SELECT button.
Deleting a favourite memory location
> When a new station is stored in a programme position that is already occupied, the previous
programme assignment is deleted and overwritten.
61