Fm Operation; Switching On Radio Mode; Fm Reception With Rds Information; Manual Station Selection - Revo GPE036W-A180200-Z Operating Instructions Manual

FM operation

Switching on radio mode

> Press the MODE button repeatedly until [FM Radio] is shown in the display.
Alternatively:
Press the MENU button and then select [Main Menu > FM].
>
The frequency is set to 87 .5 MHz when the device is switched on for the first time.
If you have already set or saved a station, the radio plays the last station set.
For RDS stations, the station name appears.
To improve reception, adjust the antenna.

FM reception with RDS information

RDS is a method of transmitting additional information via FM stations. Broadcasting stations with RDS broadcast
e.g. their station name or the programme type. It is shown in the display.
> The device can show the RDS information:
RT (Radio text),
PS (Station name),
PTY (Programme type)
.

Manual station selection

> Press  or  in FM mode to tune to the desired station. display shows the frequency in 0.05 MHz frequency steps.

Automatic station selection

Press SELECT to start the automatic station scan. The transmitter frequency scrolls upwards in the display.
>
or
> In FM mode, press and hold  or  for about 2 seconds to automatically search for the next station with
sufficient signal.
If an FM station with a sufficiently strong signal is found, the search will stop and the
station will be displayed. If an RDS station is received, the station name and, if applicable, the radio text, will appear.
To set up stations with a weaker signal, please use manual station selection.
60