Table of Contents
Advertisement
Sleep Mode
Setting A Sleep Period
It is possible to programme iBLIK
RadioStation to turn off after a pre-
defined period of time. To do so, select
the 'Sleep' option from the Main Menu.
Now, using the
and
select a sleep time period of 15, 30,
45, 60, 75 or 90 minutes.
iBLIK will now automatically put itself into
standby mode after the time has
elapsed.
System Setup
Internet Setup
Advanced users can find and edit their
Wi-Fi settings in this section, these
include MAC address, DHCP status, PC
Settings, SSID, IP Settings etc.
Time Setup
The time can be set in one of two ways,
either manually via the System Setup
option on the Main Menu, or alternatively
simply press the MODE key until iBLIK
RadioStation enters DAB Mode. In DAB
mode, iBLIK will automatically set the
correct time and date from the DAB
transmitter. iBLIK will remember its time
setting even when in standby mode, and
will only lose the time/date when power is
removed.
Under the 'Time Setup' menu, you can
also switch between 12 an 24 hour clock
formats.
Lastly, the 'Auto Update' option in the
'Time Setup' menu allows you to select
whether or not the time should be
synchronised with the DAB broadcaster
clock or from the internet. If 'No Update'
is selected, then the clock remains as
manually set.
Info
Software Version and Radio ID
You may be asked for one or both of
these pieces of information when dealing
with a technical support issue.
Both can be found under the 'Info'
heading, located in the 'Main Menu'.
keys, you can
Set sleep time
Sleep time off
Set sleep time
Sleep time off
Factory Reset
In the unlikely event that iBLIK
RadioStation should 'crash', 'freeze' or
start behaving in a strange way, it is
possible to perform a full software reset.
This operation will completely reset iBLIK's
memory, clearing all WEP/WPA codes
and user settings. This will effectively
return iBLIK to its default factory settings.
Software Update
It is possible to remotely update iBLIK
RadioStation's software via your Wi-Fi
internet connection, to ensure that you
have all the latest features, or to fix
known bugs in the software. To check
whether there are any updates available,
simply go to the 'System Setup' option on
the 'Main Menu' and select 'Software
Update'. iBLIK will search to see if a
software update is necessary, then report
back. If an update is available and
necessary, iBLIK will start the download
process and install its new software
automatically.
SW version
ir. dabp-mmi.rvo.ve
Radio ID
0013EOA11D25
17
Advertisement
Table of Contents
