Dynamic Label Plus; Setting Drc; Deleting Inactive Stations; Adjust Station Order - Revo GPE036W-A180200-Z Operating Instructions Manual

DAB+ radio
Stations whose signal strength is below the required minimum signal strength do not send a sufficient signal. Align the antenna.
Pressing the INFO button several times toggles through various information, such as programme type, multiplex name,
frequency, signal error rate, data bit rate, programme format, date (depending on the active source).

Dynamic Label Plus

If it is supported by the programme provider, the Dynamic Label Plus service allows, for example, the name of the current
programme or the title and artist to be displayed in addition.

Setting DRC

The compression rate compensates for dynamic fluctuations and associated volume variations.
Press MENU and select > [DRC] to select the desired compression rate
>
> To select the compression rate use:
DRC high - high compression
DRC low
DRC off
> Confirm by pressing SELECT.

Deleting inactive stations

Press MENU and use  or  to select > [Prune invalid].
>
Confirm by pressing SELECT.
>
> Press  or  to select > [Yes] and press SELECT to confirm.

Adjust station order

Press MENU and then press  or  > [Station order].
>
Select a sorting type with  or  and confirm your selection with SELECT.
>
You can choose between: Alphanumeric and Enseble.
- low compression
- compression switched off.
.
59