Revo GPE036W-A180200-Z Operating Instructions Manual page 70

System settings
Factory settings
If you change the location of the device, e.g. when moving house, the stored stations may no longer be receivable. In this
case, by restoring the factory settings, you can delete all stored stations and then start a new station scan.
Press MENU and then select [Main Menu > System Settings > Factory Reset].
>
Confirm by pressing SELECT.
>
> Press  or  to select Yes and accept the confirmation prompt by pressing SELECT.
All previously stored stations and settings will be deleted.
After a reset, you can start or skip the setup wizard.
Software update
From time to time, software updates may become available which may include improvements or bug fixes. The
SUPERCONNECT STEREO is therefore always up to date.
> Press the MENU button and then select [Main Menu > System Settings > Software update].
> Select [Auto-check setting] if you want the SUPERCONNECT STEREO to periodically check for new software versions
.
Select [Check Now] if you want to check whether a newer software version is available now.
>
If a software update has been found, follow the instructions on the display.
To find and download software updates, the SUPERCONNECT STEREO must be connected to the internet.
Do not switch off the SUPERCONNECT STEREO during the update process!
70