Bluetooth Mode - Revo SUPERSIGNAL Owner's Manual

BLUETOOTH MODE

Wirelessly stream music from your Bluetooth smartphone, tablet, laptop or other
Bluetooth enabled device directly to SUPERSIGNAL, without the need for physical
docking or connection.
PAIRING WITH BLUETOOTH DEVICES
'Pairing' occurs when two Bluetooth devices talk to each other and establish a
connection. This connection is stored in the memory of both devices, meaning that
once you 'pair' a particular device with SUPERSIGNAL, you shouldn't have to go
through the pairing process again.
HOW TO PAIR A BLUETOOTH DEVICE WITH SUPERSIGNAL
To enter Bluetooth mode, press the
screen is displayed. SUPERSIGNAL will now enter pairing mode, and will state
'Discoverable...' on screen.
On your Bluetooth device, ensure that Bluetooth is enabled then initiate a 'Search'
for a new device. When the search process has been completed, your device will
list all the available Bluetooth devices in your close proximity.
Select SUPERSIGNAL from the list.
Your Bluetooth device will confirm when pairing has been completed, and
SUPERSIGNAL will now display "Device Connected" on screen.
PASSKEY
During the pairing process some Bluetooth devices may prompt you to enter a
Passkey. Should your device require a Passkey, enter 0000.
Should you experience problems when pairing your device with SUPERSIGNAL,
please see the Bluetooth Troubleshooting section on page 21.
button until the Bluetooth mode intro
14:12
14:12
Bluetooth Mode
Bluetooth Mode
14:12
14:12
Discoverable...
Discoverable...
14:12
14:12
Bluetooth Mode
14:12
Device Connected
Device Connected
14:12
14:12
Discoverable...
14:12
Bluetooth
<Disconnect >
14:12
Bluetooth
<Disconnect >
Device Connected
14:12
Bluetooth
<Disconnect >
47