Features Setup Page - PCchips M847FLU Manual

Mainboard User's Manual

Features Setup Page

This page sets some of the parameters for peripheral devices
connected to the system.
AMIBIOS SETUP – FEATURES SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
OnBoard FDC
OnBoard Serial PortA
OnBoard IR Port
OnBoard Parallel Port
Parallel Port Mode
Parallel Port IRQ
Parallel Port DMA
OnBoard PCI IDE
Audio Device
Modem Device
Ethernet Device
IEEE1394 Device
Onboard USB Function
USB Function for DOS
ThumbDrive for DOS
OnBoard FDC
Use this item to enable or disable the onboard
floppy disk drive interface.
OnBoard Serial
Use these items to enable or disable the onboard
PortA
COM1 serial port, and to assign a port address.
OnBoard IR Port
Use this item to enable or disable the onboard
infrared port, and to assign a port address.
Onboard Parallel
Use this item to enable or disable the onboard
Port
LPT1 parallel port, and to assign a port address.
The Auto setting will detect and available address.
Parallel Port Mode
Use this item to set the parallel port mode. You
can select SPP (Standard Parallel Port), ECP
(Extended Capabilities Port), EPP (Enhanced
Parallel Port), or ECP + EPP.
Parallel Port IRQ
Use this item to assign either IRQ 5 or 7 to the
parallel port.
32
Enabled
3F8h/COM1
Disabled
378h
EPP+ECP
ESC : Quit
7
F1 : Help
3
F5 : Old Values (Shift)F2 : Color
Both
Enabled
F6 : Load BIOS Defaults
Enabled
F7 : Load Setup Defaults
Enabled
Enabled
Enabled
Disabled
Disabled
 : Select Item
PU/PD/+/- : Modify