Features Setup Page - PCchips M938 Series User Manual

Features Setup Page

This page sets some of the parameters for peripheral devices
connected to the system.
AMIBIOS SETUP – FEATURES SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
OnBoard FDC
OnBoard Serial Port
OnBoard IR Port
OnBoard Parallel Port
Parallel Port Mode
Parallel Port IRQ
Parallel Port DMA
OnBoard PCI IDE
Audio Device
Modem Device
Ethernet Device
Onboard USB Function
USB Function for DOS
ThumbDrive for DOS
OnBoard FDC
Use this item to enable or disable the onboard
floppy disk drive interface.
OnBoard Serial
Use these items to enable or disable the
Port
onboard COM1 serial port, and to assign a
port address.
OnBoard IR Port
Use this item to enable or disable the onboard
infrared port, and to assign a port address.
Onboard Parallel
Use this item to enable or disable the onboard
Port
LPT1 parallel port, and to assign a port
address. The Auto setting will detect and
available address.
Parallel Port Mode
Use this item to set the parallel port mode.
You can select SPP (Standard Parallel Port),
ECP (Extended Capabilities Port), EPP
(Enhanced Parallel Port), or ECP + EPP.
Parallel Port IRQ
Use this item to assign either IRQ 5 or 7 to
the parallel port.
Enabled
3F8h/COM1
Disabled
378h
ECP
7
3
Both
ESC : Quit
Enabled
F1 : Help
Enabled
Enabled
F5 : Old Values (Shift)F2 : Color
Enabled
F6 : Load BIOS Defaults
Disabled
Disabled
F7 : Load Setup Defaults
27
↑↓←→ : Select Item
PU/PD/+/- : Modify