Load Optimal Settings; Load Best Performance Settings; Features Setup Page - PCchips M586MR Manual

Load Optimal Settings

If you select this item and press Enter a dialog box appears. If you
press Y, and then Enter, the Setup Utility loads a set of fail-safe
default values. These default values are not very demanding and
they should allow your system to function with most kinds of
hardware and memory chips.

Load Best Performance Settings

If you select this item and press Enter a dialog box appears. If you
press Y, and then Enter, the Setup Utility loads a set of best-
performance default values. These default are quite demanding and
your system might not function properly if you are using slower
memory chips or other low-performance components.

Features Setup Page

This page sets some of the parameters for peripheral devices
connected to the system.
AMIBIOS SETUP – FEATURES SETUP
©2000 American Megatrends, Inc. All Rights Reserved
OnBoard FDC Enabled
OnBoard Serial PortA 3F8h/COM1
OnBoard IR Port Disabled
OnBoard Parallel Port 378h
Parallel Port Mode SPP
Parallel Port IRQ 7
Parallel Port DMA N/A
OnBoard PCI IDE Both
Ultra DMA Support Disabled
OnBoard Audio/Modem Enabled
OnBoard LAN Enabled
USB Function Disabled
USB Function for DOS Disabled
OnBoard FDC Use this item to enable or disable the onboard
floppy disk drive interface.
3: BIOS Setup Utility
 : Select Item
ESC : Quit
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load Optimal values
F7 : Load Best performance values
31