Stand Alone Function - ProLights ArcPod 15VW User Manual

STAND ALONE FUNCTION

To set the STAND ALONE you must follow the below steps with DATAMASTER:
Fig. 08
• Connect only one projector to the DATAMASTER;
• Select the second function "STAND ALONE";
• Select "Manual Color" or "Effect" function;
• Select "Head 1";
• Select the desired color or effect with speed.
The projector where is setted the STAND ALONE values is a "MASTER" projector.
If there isn't the DMX controller or the DMX missing this projector will send his STAND ALONE value
on the DMX line.
On others units that will be connected to the same DMX line must NOT be setted the STAND ALONE,
they will be "SLAVE" and they will follow the DMX of the MASTER.
PROLIGHTS - ArcPod 15VW
13