Fixure Information; Reset Function - ProLights LUMIPIX6Q User Manual

16
• Press the button MENU so many times until shows [AUTO TEST].
• To confirm and start the automatic test press the ENTER button.
Manual Test
Allows you to adjust effects from the control panel to obtain perfect uniformity between the projec-
tors.
• Press the button MENU so many times until shows [MANUAL TEST], then press the ENTER button to
confirm the choice.
• Select the parameter to be changed between [R - G - B -W - D - S] and press the ENTER button to con-
firm the choice.
• Set the desired parameter value between the [0 - 255] range using the UP/DOWN buttons and press
the ENTER button to confirm the setting.
• Press the MENU button to go back or to meet the waiting time to exit from the setup menu auto-
matically.
3.16 FIXTURE INFORMATION
Fixture Time
Show the fixture working hours.
• Press the button MENU so many times until shows [FIXTURE TIME]
• Then the display will show the working hours.
• Press the MENU button to go back or to meet the waiting time to exit from the setup menu auto-
matically
Firmware Version
Show the fixture firmware version.
• Select through the directional buttons the [VERSION] menu voice.
• The display will show the firmware data.
• Press the MENU button to go back or to meet the waiting time to exit from the setup menu auto-
matically

3.17 RESET FUNCTION

Factory Settings
• Press the button MENU so many times until shows [FACTORY SETTINGS], then press the ENTER button
to confirm the choice.
• Select [YES] to restore the unit to the factory settings.
Reset
• Press the button MENU so many times until shows [RESET], then press the ENTER button to confirm.
• Select [YES] to reset the default values.
REMARKS
Press ENTER go to CODE mode:
• Input 70, press ENTER for factory setting.
• Input 80, press ENTER to clear the fixture's time.
LUMIPIX6Q