Table of Contents
Advertisement
3 - INSTALLATION
MOUNTING
Check that the supporting structure can safely bear the weight of all installed fixtures, clamps, cables,
auxiliary equipment, etc. and complies with locally applicable regulations.
For temporary installation when suspending the fixture above ground level, secure it against failure of
primary attachments by attaching a safety wire that is approved as a safety attachment for the weight
of the fixture to an anchor point on the product main frame.
For fixed installation use M8 bolts.
Do not use removable parts or weak anchors for secondary attachment.
Warning! When clamping the fixture to a truss or other structure at any angle, use clamps of half-cou-
pler type. Do not use any type of clamp that does not completely encircle the structure when fastened.
TILT movement: 130°.
Screws for unlock and lock
the TILT (on both sides).
Slots for fixing.
R4 mm
R0.2 in
8 mm
0.3 in
307 mm
12.1 in
289 mm
11.4 in
PROLIGHTS - ArcPod 15VW
Fig. 02
07
Advertisement
Table of Contents
