After Installation - CeraGem MASTER V6 User Manual

3. Installation
* After you purchase the product, a professional installation technician will carry out
the basic assembly process.
1
Remove the product and its components from the box.
2
Check and connect the abdominal vibration projector correctly.
(Insert the connector correctly and fix it properly by turning the fixture.)
3
Remove the film from the LCD and the keypad on the
remote control.
4
Connect the power cord to the main body first and plug
the power cord into an electrical outlet.
14

4. After installation

1
Turn on the power (located at the bottom of the main body).
2
Press the POWER button on the remote control and check
that the screen turns on.
* When power is supplied to the main body, the LED on the side of the remote control turns on,
and when the remote control turns on, the LED will turn off.
* Refer to Page 21 for the screen of the remote control.
1. Set the correct temperature for each user.
2. Sit on or use the product after opening the supporting mat to its end.
Caution
15