Maintenance And Storage; Troubleshooting - CeraGem MASTER V6 User Manual

2. Maintenance and Storage

1
Exterior of the product is a petroleum-based product and should not be
exposed to organic solvents such as acetone, ballpoint pen, gasoline, thinner,
sweat, hair mousse or hair spray.
Where there is direct contact with the head or skin, wipe with a dry cloth.
If there is contact with cosmetic products or volatile emulsions and is left
for a long time, the surface may peel off so wipe with a dry cloth as soon as.
When washing outer fabric, make sure to hand wash separately with
a neutral detergent.
If there is contact with hot objects or heat, the leather will curl up so
please use caution.
Avoid wearing clothes that may cause stains when using the product.
(Please be careful as there is a risk of contamination caused by external friction.)
Avoid direct sunlight and humidity and store at room temperature.
(It causes discoloration and aging of the product.)
Please do not twist the remote control cable.
44

3. Troubleshooting

Does the remote control turn on?
Q : Is the power cord connected properly?
Q : Is the power switch on the bottom
of the product on?
The the abdominal vibration projector do not operate.
Q : Are the abdominal vibration projector
connected properly?
Is the product malfunctioning?
Q : Can you move the internal projectors
using the up/down key?
Q : Can some of the remote control
keys be operated?
Q : Is the supporting mat fully closed?
Is the air massage mode not working?
Q : Is the air hose not twist or fold?
Are the diagnosis code messages displayed on the remote control?
Q : Are the diagnosis code messages
displayed on the remote control?
Why is the USB not recognized?
Q : Is a sound source in a USB device
not playing back?
Customer Support Center
CERAGEM INTERNATIONAL INC.
LOS ANGELES, CA 90010
3699 WILSHIRE BLVD. STE 930
213-480-7070
A : Connect the power cord again.
A : Turn on the power switch.
A : Connect the abdominal vibration projector
properly.
A : Internal projectors can be moved using
the up/down key only in intensive mode,
semi-automatic mode, manual mode.
A : Check the condition of the supporting mat.
Some of the remote control keys cannot be
operated if the supporting mat is not
completely opened.
A : Make sure the power cord is plugged in.
Make sure the remote control is powered on.
A : Be careful not to twist or fold the air hose.
A : After checking the diagnosis code messages,
contact the customer support center.
Never dismantle the product arbitrarily.
A : It takes time for the product to recognize
a USB device. Check if it is connected
correctly, wait, and try again.
A : Is there a playable sound source stored in USB?
Please check.
45