Check After Installation - CeraGem CGM MCB-1201 User Manual

4. Check after Installation

1
Unfold the auxiliary part completely.
(The remote control will not work unless you unfold the auxiliary part.)
2
Turn on power at the side of the main body.
(Turn off power when the product is not in use.)
3
Press the power key of the remote control and check whether the
display turns on.
1. Before connecting the power cord, connect the remote control first.
2. Set the temperature appropriately according to user when using the product.
3. After using the product, turn off power on the remote control, and then turn
Caution
16
1 2
off the main body.
2
1
*For the remote control's screen,
refer to page 19.