CeraGem MASTER V6 User Manual page 4

C o n t e n t s
Important safety issues Warnings and safety information Important safety issues
10. Do not use the external projector(s) for more than 2~3 minutes on one part of the body.
(The projector must be moved to another part of the body after 2~3 minutes.)
11. Do not apply shock to the product.
12. Do not close the supporting mat or detach the remote control during use.
(The active mode is automatically terminated.
13. The appliance has a heated surface. Persons insensitive to heat must be careful when using
the appliance.
14. Please take care not to spill any foreign substance in between the main equipment and the
supporting mat.
(It can cause electric shock, fire, injury, and/or equipment failure.)
15. Please do not throw the remote control or pull on the connecting cable.
(It can cause injury and equipment failure.)
16. The device must not be located in a location where it is hard to remove the detachable
power plug.
17. When a set period of time has passed after setting the mode, the internal projector will
move automatically. Lie down in the appropriate body position (as shown next page).
18. Do not pull or throw the air cell massager parts forcefully.
19. Do not twist the air hose of the air cell massager.
20. If the pressure is too strong when using the air cell massager, stop using
the product immediately.
21. Sticking a sharp object into air cell massager parts may cause malfunction.
22. A level of noise may be heard while the air cell massager is operating.
23. If the pressure when using the air cell massager differs significantly from that
felt during previous use, contact the customer service center.
24. Do not wash or soak the air cell massager/air massage module in water.
25. Wipe the air cell massager/air massage module gently with a wet cloth or towel.
26. When sitting or lying down on the product, the product senses body shape
automatically and the internal projector may move.
27. Data in the USB memory may be damaged while using the product.
Store important data on a separate device.
(Ceragem is not responsible for any loss of data).
28. Twisting may occur due to the characteristics of the remote control cable
component, so check its condition after using the product.
(If the cable is twisted, it may be difficult to store.)
29. Be sure to fully open or close the supporting mat before use.
(Applying a load without fully opening or closing the supporting mat may cause product
damage or failure.)
30. Do not connect more than one electrical product into the same outlet.
31. When using the product in the abdominal area, avoid using it in the rib area.
32. This product is not a processed product under the act on Protective action
guidelines against radiation in the natural environment.
4
Caution
Warnings and safety information
Proper body position for use
1) Extend the device by pulling the supporting mat as shown below.
2) Lay your body on the device as shown below.
3) Align the user's head with the logo on the top of the device. (marked with a circle)
※ Important information on symptoms
Persons with pre-existing conditions (i.e. spinal conditions, distinct hypertension, high blood pressure,
cardiovascular disease, dizziness, etc.) should moderate massage intensity, temperature, duration,
and frequency of use. If adverse reactions are encountered during or immediately following use,
immediately stop use and consult your physician.
User must report a suspected medical device-related serious injury to both the authority and
manufacturer.
Also, if user encounters a situation that user consider to be an adverse event when using the device,
user should also report it to the authorities and manufacturer.
This device is designed for home use.
Notice to users
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limit for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular
installation, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
Caution
5