Moving The Product - CeraGem MASTER V6 User Manual

3. Using the remote control
Changing a product number
* If there are two or more products in the one space, the device number can be changed as required for use of the product.
* Devices can be identified and selected by number when connceted via bluetooth.
1. Close the supporting mat and press and hold the
start/pause button for about 3 seconds.
2. The current device number appears on the upper left
5 01
side of the screen.
3. Change the product number to the desired number
5
using the up/down button.
- The device number will only appear during setting.
- The device number can be set between No. 01-99.
38

4. Moving the product

1
Close the supporting mat and unplug the cable of the abdominal vibration
projector from the main body.
①
Turn off the remote control after closing the supporting mat.
(If you close the supporting mat after unplugging the power cord, the supporting mat won't be
Caution closed completely.)
2
Lift the device from either end, hands placed beneath the main mat.
Move to the desired location.
- When lifting the equipment, lift with your legs, not your back to prevent injury.
- Be sure to prevent the supporting mat from opening while moving the product.
Caution
②
Waterproof cover
when transporting or storing
39