CeraGem MASTER V6 User Manual page 17

3. Using the remote control
Using the air massage mode
* Be sure to use the air cell massager after connecting it to the main body.
1. Make sure that the air cell massager is connected
properly.
- The current status will be displayed.
2. Set the mode by pressing the air massage button
and press the start/pause button.
- You can set the desired mode by using the air cell massage button or
the up/down button while the relevant item is displayed in yellow.
- Modes 1-3 can be used.
1 2
Modes 1-3
1
5 5 3. After setting the mode, operation will start in the
Delete s peed
selected mode.
- Shortly after setting is complete, the screen will return to the main screen.
3
- When the Main mode is paused, the air massage will be paused also, and will not resume
when the main massage begins. (It is necessary to re-start the air massage separately.)
- When massage is paused while using the product, the pause image will be displayed.
30
- When the product is closed, the closed product image will be displayed.
- When using the air cell massage, even if motion sounds (woo~ng, tak tak)
of the air pump and solenoid occur, it is not a failure. It is safe to use it.
- Use the air cell massager after raising the zipper to the end.
- Do not use the product on other areas except for the legs.
Caution
Sequential pressing
(Modes 1-3 are selected sequentially)
Approximately 18 minutes
3. Using the remote control
Using the air massage strength
1. Check the screen of the remote control.
5 5
- The current status will be displayed.
2. Set the strength by pressing the air massage strength
button and press the start/pause button.
- You can set the desired mode by using the air massage strength button
or the up/down button while the relevant item is displayed in yellow.
- Strength can be set at levels 1-9.
1
Sequential pressing
2
5 5 3. After setting is complete, the mode will start at the
Delete s peed
selected strength.
Stored music 5 / Volume 5
Body icon
- Shortly after setting is complete, the screen will return to the main screen.
Vibration Strength Shade
Vibration projector Automatic mode
Strength 5
Temperature 55
3-sphere projector / Abdominal vibration projector
(Strengths 1-9 are selected sequentially)
31