Before Installation - CeraGem MASTER V6 User Manual

1. Check product components
Main body
1
Use it lying down as a device that helps relieve muscle pain.
Abdominal vibration projector
2
This can be connected to the main body and used on the abdomen.
Abdominal vibration projector cover
3
Can be used to cover the abdominal vibration projector.
Remote control
4
Used to check the product functions and operating condition of the product.
Remote control back label
5
Explanation of the buttons on the remote control (attaches to the back of the remote
control.
Power cord
6
Connects with the main body and plugs into an outlet for use.
User manual
7
Explains use of the product.
Outer fabric
8 Protects against product contamination and burns; this detachable
fabric makes washing easy.
Head cushion
9
This is attached to the top of the product.
Assembly guide
10
Product assembly methods are described.
Air cell massager
11
It helps blood circulation and is worn on the legs.
Waterproof cover
12
Use the waterproof cover to protect your product when transporting or storing.
Rug
13
To protect the product and floor, you can put it under the main body and use it
12

2. Before installation

1
Install where the ground is flat to avoid the risk of damaging the product.
2
Try and avoid installation where there is a lot of humidity or dust.
(To avoid risking electric shocks or fire.)
3
Install according to the designated order.
4
Do not drop the product or apply any force to it.
(This could cause malfunctioning.)
5
Please check the rated voltage(100-127V~.) when installing the product.
(This can also cause circuit breakage and fire.)
6
Do not use old outlets and damaged power cables or plugs.
(There is a risk of electric shock.)
7
After you purchase the product, a professional installation technician will
install it. Do not assemble or disassemble the product yourself.
13